Netis P110C Network POE Switch 8POE 2RJ45 100M Standard POE Switch Hardware Interface 8*10/100Mbps POE ports（Data/Power) 2*10/100M uplink RJ45 ports (Data) Basic function Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol Supports POE IEEE 802. 3af/at compliant Powered Device (PD) Store-and-forward switching scheme Support IEEE802.3X full duplex and Backpressure half duplex MAC address auto-learning & auto-aging Standards IEEE 802.3 10BASE-T Ethernet IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af/at, Power over Ethernet IEEE 802.3x Flow Control Mode Normal switch mode/Extend mode Data Transfer Rate Etherent:10Mbps(Half-duplex);20Mbps(Full-duplex) Fast Entherent:100Mbps(Half-duplex);200Mbps(Full-duplex) Store & Forwarding Yes Switching Capacity 2G MAC Address Table Size 2K Jumbo Frame 2048 byte Environment Operation Temperature：0℃～40℃ Storage Temperature：-40℃～70℃ Operation Humidity：10%～90% RH Non-condensing Storage Humidity：5%～90% RH Non-condensing Power Input POE Standards Single port maximum power 30W, Whole switch maximum power 120W Support over-current,over-voltage and short-circuit protection Support Soft Start of High Power PD Support sequential boot-up Power Supply Pin:12 /36- 100-240V 2A Max(Input) 52V 2.3A Max(Output) Cabling type 100Base-TX: Cat 5e or better UTP/STP(≤100m) 10Base-TX: Cat 5e or better UTP/STP(≤250m) Dimensions (L x W x H ) 190mm*140mm*43mm
